HFTX-EX

Level indicators

Teknisk datablad
470022-bjt_b

Velg deltype

Velg ønsket deltype for å se forhåndsvist tegning av tekniske dimensjoner

Bracket Material
Material
Bushing Material
Carrying Capacity
Diameter
Plunger Diameter
Type Of Assembly
Type Of Tube
Diameter Bases
Connecting Thread
External Diameter
Handle
Hole
Lever Length
Wheel Base
Threaded Screw
Hole Distance
Threaded Connection
Type Of Bellow
Type Of Vacuum Cups Holder
Vacuum Cup Holders Dimension
Vacuum Cups Dimension
Connector

Viser alle 13 resultater

    Vennligst velg en deltype for å få relevante valg.

    Lukk
    Description HFTX.11-M16x1.5-EX
    d1
    —
    • —
    A
    —
    • —
    B
    —
    • —
    D
    —
    • —
    d
    —
    • —
    s
    —
    • —
    Tightening torque
    —
    • —
    Weight
    —
    • —
    CAD
  • Description HFTX.11-M16x1.5-EX
    d1 M16x1.5
    A 8
    B 7
    D 22
    d 11
    s 19
    Tightening torque 2÷3
    Weight 4
  • Description HFTX.12-3/8-EX
    d1 G 3/8
    A 7.5
    B 7
    D 22
    d 11
    s 19
    Tightening torque 3÷5
    Weight 4
  • Description HFTX.14-M20x1.5-EX
    d1 M20x1.5
    A 9.5
    B 8
    D 26
    d 14
    s 22
    Tightening torque 8÷10
    Weight 5
  • Description HFTX.15-1/2-EX
    d1 G 1/2
    A 10.5
    B 8
    D 26
    d 14
    s 22
    Tightening torque 4÷6
    Weight 5
  • Description HFTX.18-M25x1.5-EX
    d1 M25x1.5
    A 8
    B 9
    D 31.5
    d 18
    s 27
    Tightening torque 8÷10
    Weight 8
  • Description HFTX.19-M27x1.5-EX
    d1 M27x1.5
    A 9
    B 9
    D 31.5
    d 20
    s 27
    Tightening torque 8÷10
    Weight 8
  • Description HFTX.20-3/4-EX
    d1 G 3/4
    A 10.5
    B 9
    D 31.5
    d 20
    s 27
    Tightening torque 6÷8
    Weight 8
  • Description HFTX.21-M26x1.5-EX
    d1 M26x1.5
    A 13
    B 9
    D 31.5
    d 18
    s 27
    Tightening torque 8÷10
    Weight 8
  • Description HFTX.22-M30x1.5-EX
    d1 M30x1.5
    A 9
    B 10
    D 35
    d 22
    s 30
    Tightening torque 8÷10
    Weight 10
  • Description HFTX.24-1-EX
    d1 G 1
    A 11
    B 10
    D 40
    d 25
    s 34
    Tightening torque 8÷10
    Weight 12
  • Description HFTX.26-M35x1.5-EX
    d1 M35x1.5
    A 11
    B 10
    D 40
    d 25
    s 34
    Tightening torque 8÷10
    Weight 13
  • Description HFTX.30-1 1/4-EX
    d1 G1 1/4
    A 11.5
    B 13
    D 47
    d 30
    s 40.5
    Tightening torque 8÷10
    Weight 20
  • Description HFTX.31-M40x1.5-EX
    d1 M40x1.5
    A 11.5
    B 13
    D 47
    d 30
    s 40.5
    Tightening torque 8÷10
    Weight 20
Main specifications
Material

Transparent polyamide based (PA-T) technopolymer. Avoid contact with alcohol or detergents containing alcohol.

Star-shaped contrast screen

Matte anodised aluminium with red central level point.

Packing ring

NBR synthetic rubber.

Maximum continuous working temperature

80°C.

ATEX directive compliance

HFTX-EX level indicators series comply with the Essential Health and Safety Requirements of the European ATEX Directive 2014/34/ EU (explosive atmospheres) for Group II devices, category 2GD.

Indicators have “h” protection mode and can be mounted in devices protected by means of immersion in liquid "k”, without lowering their protection degree.

II 2GD Ex h X: is the level indicators identification marked on the HFTX-EX product according to ATEX

II: group of devices / components suitable for use in surface industry except for mines.

2: ATEX category corresponding to "high" protection level

G: explosive atmosphere of flammable gases or vapors.

D: explosive atmosphere of combustible dusts.

Ex: device / component protected against the ignition of explosive atmospheres.

h: protection mode for non-electric devices / components.

X: special conditions and limitation of use (see Instructions for use).

Ambient and/or fluid temperature: -20 ÷ +80 °C

The documentation concerning the conformity of this product to the European Directives above mentioned and the instructions for use are integral parts of the article itself.

General information
Features

The particular shape of the magnifying lens increases and improves visibility even from side positions.

Technical data

The tightening torque recommended in the table prevents accidental loosening of the article, in addition to guaranteeing an optimal seal.

Note

Accessories
Accessories on request

Brass nut GH. for fitting to reservoirs with wall thickness smaller than 5 mm.

Handlekurv
Skroll til toppen