GN 119.3
Latches with key
Velg deltype
Velg ønsket deltype for å se forhåndsvist tegning av tekniske dimensjoner
Bracket Material
Material
Bushing Material
Carrying Capacity
Diameter
Plunger Diameter
Type Of Assembly
Type Of Tube
Diameter Bases
Connecting Thread
External Diameter
Handle
Hole
Lever Length
Wheel Base
Threaded Screw
Hole Distance
Threaded Connection
Type Of Bellow
Type Of Vacuum Cups Holder
Vacuum Cup Holders Dimension
Vacuum Cups Dimension
Connector
Main specifications
Handle
Die-cast zinc alloy.
Rotor, latch cam, screw, washer, spring washer and nut M22x1.5 in zinc-plated steel. Distance element in aluminium.
Standard executions
- GN 119.3-DK: with triangular groove for key.
- GN 119.3-VK7: with square 7 groove for key.
- GN 119.3-VDE: with groove for two-wing key.
- SW index: handle in RAL 9005 black colour.
- SR index: handle in RAL 9006 grey colour.
Packing ring
NBR synthetic rubber.
Keys (to be ordered separately)
Die-cast zinc alloy with epoxy resin coating, RAL 9005 black colour, matte finish.
- With triangular groove, GN 119.2-86-DK7-SW (code GN.38701).
- With square 7x7 groove, GN 119.2-86-VK7-SW (code GN 38706).
- With two-wing groove, GN 119.2-86-VDE5-SW (code GN.38711).
General information
Features and applications
GN 119.3 handles with latch cams have a pulling-in range of 10 mm.
The internal O-ring prevents the ingress of liquids, dust, etc. through the door.
Instructions of use
Assembly instructions
- Drill a hole in the door as per the drilling template drawing with the axis at a distance of 23 mm from the door frame.
- Insert frontally the latch body in the hole of the door and screw on the threaded nut.
- Insert the distance element and the cam by fitting it by the threaded screw.