VCK.

Phenolic based (PF) Duroplast, black colour, glossy finish.

Standard executions

• VCK (for doors with thickness S > 5 mm):

• plain stud in zinc-plated steel;

• helical latch cam in sintered and vaporized steel with hole for pinning;

• spring dowel pin Ø 3x20 mm in black-oxide steel;

• latch spring to compensate door thickness in zinc-plated steel;

• opening to the right side (D) or left side (S).

• VCK+G (for doors with thickness S > 5 mm): as per VCK but with the interposition of guide bush and nut (except type with L = 24 mm), in nickel-plated brass and flat spring washer in zinc-plated steel.

• opening to the right side (D) or left side (S).

• VCK-SST: (for doors with thickness S > 5 mm):

• plain stud in AISI 303 stainless steel;

• helical latch cam in AISI 316 L sintered stainless steel with hole for pinning;

• spring dowel pin Ø 3x20 mm in AISI 303 stainless steel;

• latch spring to compensate door thickness in AISI 302 stainless steel;

• opening to the right side (D) or left side (S).

• VCK+G-SST (for doors with thickness S ≤ 5 mm): as per VCK-SST but with the interposition of guide bush, nut and DIN 6798 flat spring washer in AISI 303 stainless steel.

• opening to the right side (D) or left side (S).

Kit guide bush and nut (see table with codes and descriptions).

• Select the knob with stud length (l) according to the conditions reported in the here-under table.

• Drill a cylindrical assembly hole in the door according to the conditions reported in the table.

• Drill a hole in the stud for pinning at a distance "f" from the knob according to the conditions reported in the table.

• Fit the stud in the hole on the door and assemble the other components.

VCK. latches are supplied not assembled.